泰克TDP0500差分探頭

簡要描述：● 泰克TDP0500差分探頭擁有500 MHz的探頭帶寬，小于1pF的電容差分輸入，1 MΩ的微分輸入電阻。TDP0500差分探頭可應用于高速開關電源設計。制造工程試驗中也可以應用TDP0500差分探頭。

產品型號：
廠商性質：代理商
更新時間：2025-12-26
訪問量：2544

產品咨詢聯系我們

產品分類

泰克探頭產品

高壓探頭差分探頭無源探頭有源探頭電流探頭查看全部產品

相關文章

詳細介紹

Introduction

Features & Benefits
Outstanding Electrical Performance

1 GHz and 500 MHz Probe Bandwidth
<1 pF Differential Input Capacitance
1 MΩ Differential Input Resistance
±42 V （DC + pk AC） Differential Input Voltage
> 18 dB CMRR （at 250 MHz 50X Attenuation）
Selectable Bandwidth Limiting Filters
DC Reject

Versatile DUT Connectivity

Small Compact Probe Head for Probing Small Geometry Circuit Elements
Straight Pin, Square Pin, Solder Down, Variable Pitch Standard Accessories
Robust Design for Reliability

Ease-of-Use

Provides Automatic Units Scaling and Readout on the Oscilloscope Display
TDP1000, TDP0500

Connect Directly to the DPO7000, DPO4000, and MSO4000 Series Oscilloscopes Using TekVPI? Probe Interface （No additional Power Adapters Required）
Easy Access to Scope-Displayed Probe Menu for Probe Setup Control and Operating Status Information
AutoZero – Zeros Out Output Offset

P6251, P6250

Connect directly to TDS5000 and other TekProbe? interface oscilloscopes, or to TekConnect oscilloscopes using TCA-BNC adapter

Applications

High-speed Switch Mode Power Supply Design
CAN/LIN Bus Design
High-Speed Digital Design
Digital Design and Characterization
Manufacturing Engineering Test
Research and Development

The TDP1000, TDP0500, P6251, and P6250 High Voltage Differential Probes provide excellent high-speed electrical and mechanical performance required for today's Switch Mode Power Supply （SMPS）, CAN/LIN Bus, and high-speed digital system designs.
Specifically designed for use with and direct connection to Tektronix oscilloscopes with either the TekVPI? probe interface, or TekProbe BNC Interface. The TDP1000, TDP0500, P6251, and P6250 High Voltage Differential Probes achieve high-speed signal acquisition and measurement fidelity by solving three traditional measurement challenges:

Outstanding Electrical Performance
Versatile Device Under Test Connectivity
Ease-of-Use

„Characteristics/Specs

Characteristics

	Description
Bandwidth（Probe Only）	1 GHz（TDP1000, P6251）, 500 MHz（TDP0500, P6250）
Attenuation	5X，50X
Rise Time（Probe Only）	≤350ps（TDP1000，P6251）， <700ps（TDP0500，P6250）
Differential Input Capacitance	<1pF
Differential Input Resistance	1MΩ
CMRR	>55 dB at 30 kHz；
	>50 dB at 1 MHz；
	>18 dB at 250 MHz （warranted at 50X attenuation）
Sensitivity/Noise Level	2 mV RMS （5X attenuation）；
	1 mV RMS （50X attenuation） referred to the probe output
	10 mV RMS （5X attenuation）；
	50 mV RMS （50X attenuation） referred to the probe input
Differential Mode Input Voltage	±42V （DC + pk AC）；30 VRMS
Common Mode Input Voltage	±35V （DC + pk AC）；25 VRMS
Input Offset Range
TDP1000, TDP0500	±42V（5X or 50X attenuation）
P6251, P6250	±4.25V（5X attenuation）； ±42V（50X attenuation）
Max Input Voltage（Non-destruct）	±100V（DC+pkAC）
Selectable Bandwidth Filter Limits
TDP1000, TDP0500	100Hz，10kHz，1MHz，F(xiàn)ull
P6251, P6250	5MHz，F(xiàn)ull
DC Reject	0.4Hz（5X）；4Hz（50X）
Gain Accuracy at DC	±2%
Propagation Delay	6.5ns
Scope Interface
TDP1000, TDP0500	TekVPI Probe Interface
P6251, P6250	TekProbe BNC Level II Interface

Physical Characteristics

	TDP1000， TDP0500	P6251， P6250
Dimensions	lbs/in	kg/cm	lbs/in	kg/cm
Weight	0.320 lbs	0.146 kg	0.360 lbs	0.163kg
Compensation Box Dimensions
Height	1.6 inches	4.1 cm	1.0 inches	2.6cm
Width	1.2 inches	3.05 cm	1.6 inches	4.1cm
Length	4.2 inches	10.7 cm	3.2 inches	8.13cm
Cable Length	47.2 inches, 1.2 meter

Power Requirements

TDP1000，TDP0500	Are powered directly by the DPO7000, DPO4000, and MSO4000 Series oscilloscopes using the TekVPI interface
P6251，P6250	Are powered directly by the TekProbe-BNC interface, eliminating the need for additional power supplies and cables when used with TekProbe-BNC oscilloscopes. May also be powered through the 1103 TEKPROBE Power Supply for use with non-TekProbe interface instrumentation.

Standard Warranty - 1 year parts and labor
Recommended Oscilloscopes

Probes	Oscilloscopes	Interface	Adapter Required
TDP1000，TDP0500	DPO7000，DPO4000，and MSO4000 Series	TekVPI probe	—
P6251，P6250	TDS5000 Series, TDS500, TDS600 and TDS700 Series, and other Tektronix oscilloscopes with TekProbe BNC-Level2 interface.	TekProbe BNC-Level2	—
P6251，P6250	DPO70000，DSA70000，TDS6000 and TDS7000 oscilloscopes	TekConnect	TCA-BNC

Required Oscilloscope Firmware

Probe	Oscilloscopes	Firmware
TDP1000，TDP0500	DPO7000 Series	Version 3.0.2 or later.
TDP1000，TDP0500	DPO4000/MSO4000 Series	Version 2.06 or later.
P6251， P6250	TekProbe-BNC Level II Oscilloscopes and adapter（TCA-BNC）	TekProbe-BNC interface is firmware-independent

產品咨詢

留言框

產品：
您的單位：
您的姓名：
聯系電話：
常用郵箱：
省份：
詳細地址：
補充說明：
驗證碼：

請輸入計算結果（填寫阿拉伯?dāng)?shù)字），如：三加四=7

泰克TDP0500差分探頭

留言框

產品：

您的單位：

您的姓名：

聯系電話：

常用郵箱：

省份：

詳細地址：

補充說明：

驗證碼：